The Model FT-C is a foot operated rocker arm type spot welding machine with a built-in timer control as standard equipment. This machine provides such features as a low fatigue toggle type foot lever system which develops the welding pressure with only a few pounds at the lever. A 4" pull-out adjustment of the top welding arm, a vertical and side adjustment of the lower arm, ejector type water cooled electrodes, side panels hinged for easy access to the machine interior, a separate compartment built into the frame to house the electrical controls and a frame size designed to save valuable floor space.
This machine provides automatic weld current timing to assure accurate and consistent spot welds. A machine of great versatility equally adaptable for the small shop or high production line.
Arm spacing 5 1/2" minimum to 13 1/2"maximum 4" pullout of top arm. 8" vertical, 2" right and left adjustments on lower arm. The arms are adjustable for parallel operation allowing the use of the flat faced tips for cross wire and projection welding.
1" diameter x 8" ejector type water cooled tip holders for number 1 Morse Taper electrodes or special types can be supplied.
Heavy steel construction with swinging side panels. Base 14"x 30"; height 41"; width 12"; length 24".
Rotary tap switch for 8 heat ranges.
C.S.A. approved, rugged, water cooled for continuous production, at 50% duty cycle R.W.M.A. standards.
2" hard drawn copper machined to W-O-M specifications.
2" hard drawn copper machined to W-O-M specifications to clamp electrode holders at 30° and 90°.
The Model F-TC comes equipped with a Nema type solid state Series 2000 control, controlling time and percentage heat for more consistent spot welds.